82
Step1 Click Internet > LAN to display the Local Area Network (LAN) Settings
page. Set the IP address of AP2 to be 192.168.1.2.
Step2 On the Basic Wireless Settings page, set the WDS mode to be Bridge
Mode and enter the MAC address of the AP1.
5.5 Wireless Settings (WISP Mode)
In the WISP mode, the following figure shows the navigation menu of the Wireless:
In the WISP mode, the sub-menus of the Wireless Settings include Profile, Link
Status, Site Survey, Statistics, Advance, QoS, and About.
To Next Page
Loading...
