35
Field Description
Spanning Tree generating loop. You may select Enable or Disable.
LLTD After enabling LLTD (Link Layer Topology Discovery),
Windows Vista automatically discovers other devices’ link
topologies, and these devices are also compatible with
LLTD. You may select Enable or Disable.
IGMP Proxy Enable or disable IGMP Proxy.
IGMP Snooping Enable or disable IGMP Snooping. After enabling this
function, the packets of the IGMP broadcast will not be
sent to the LAN interface that does not belong to the
group.
UPNP Enable or disable the UPnP function. After enabling this
function, AP will provide automatic port-mapping for P2P
software on the interior network.
Router
Advertisement
Enable or disable router advertisement. After enabling this
function, APs will send broadcast message or send back
message to show their existence.
PPPoE Relay Enable or disable PPPoE Relay. After enabling this
function, the local PC can directly make PPPoE dial-up in
the gateway mode.
DNS Proxy Enable or disable DNS Proxy. After enabling this function,
the devices on the LAN where AP acts as a proxy can
send domain resolution request to AP.
After finishing the settings, click the Apply button to apply the settings.
5.3.2 WAN
Click Internet > WAN to display the Wide Area Network (WAN) Settings page.
To Next Page
Loading...
Need help?
General
