Getnet GR-124W User Manual

31
GETNET GR-124W provides three types of operation modes, including Bridge,
Gateway, and WISP modes.
The parameters on this page are described as follows:
Mode Description
Bridge In the bridge mode, AP acts as a hub.
Gateway In the gateway mode, GR-124W allows routing between
WAN and LAN, or WAN and wireless network.
WISP In the WISP mode, all the Ethernet interfaces can access
the Internet by wireless routing.
NAT
Enabled
Only in the gateway mode can this function be used. After
enabling NAT, it can provide address translation between
the interior network and the exterior network for LAN and
wireless network.
After finishing setting, click the Apply button to apply the settings.
5.3 Internet Settings
In the gateway mode, the following figure shows the navigation menu of the Internet
settings:

Getnet GR-124W Specifications

General

Brand	Getnet
Model	GR-124W
Category	Wireless Router
Language	English