36
This page is used to configure the WAN connection parameters. On this page, you
may choose the proper WAN connection type and configure the parameters related to
the connection type.
The parameters on this page are described as follows:
Field Description
WAN
Connection
Type
The WAN connection types include STATIC (fixed IP), DHCP
(Auto config), PPPoE (ADSL), L2TP, and PPTP. The default
WAN connection type is DHCP (Auto config).
MAC
Clone
Enable or disable MAC Clone. After enabling this function, click
the Fill my MAC button, and then AP will use this MAC address
to communicate with the device that connects to the AP’s WAN
interface. The default setting is Disable.
STATIC (fixed IP)
On the Wide Area Network (WAN) Settings page, select STATIC (fixed IP) as the
WAN connection type, and the following page appears.
To Next Page
Loading...
