37
On this page, enter the IP address, the subnet mask, the default gateway, and the
DNS server provided by the ISP.
After finishing setting, click the Apply button to apply the settings.
DHCP (Auto config)
On the Wide Area Network (WAN) Settings page, select DHCP (Auto config) as
the WAN connection type, and the following page appears.
If you select DHCP (Auto config), AP acquires the network parameters via WAN
interface, such as the IP address, the subnet mask, the gateway, and the DNS server
address.
After finishing the settings, click the Apply button to apply the settings.
To Next Page
Loading...
