Getnet GR-124W User Manual

11
Step5 On the Wide Area Network (WAN) Settings page, set the WAN
Connection Type to be PPPoE (ADSL) and enter the correct PPPoE
username and password. After finishing setting, click the Apply button to
start dial-up.
The Network Connection Mode of DHCP (Auto config)
If you can access the Internet without dial-up, and ISP provides DHCP service,
please follow the steps below to finish setting.
Step1 Use one Ethernet cable to connect the uplink interface of router or
gateway to the WAN interface of the GR-124W.
Step2 Use one Ethernet cable connects your PC to the LAN interface of the
GR-124W. Set the TCP/IP properties of the network adapter. By default, it
is recommended you set the network adapter to be Obtain an IP address

Getnet GR-124W Specifications

General

Brand	Getnet
Model	GR-124W
Category	Wireless Router
Language	English