57
The parameters of Advanced Wireless are described as follows:
Field Description
BG Protection
Mode
You may select On, Off, or Auto. The default BG
protection mode is Auto.
Beacon Interval By default, wireless beacon signal sends data to
station every other 100 ms. The range is 20~999.
Data Beacon Rate
(DTIM)
The default DTIM is 1ms. The range is 1~255.
Fragment
Threshold
The default fragment threshold is 2346. The range is
256~2346.
RTS Threshold The default RTS threshold is 2347.The range is
1~2347.
TX Power Set the Tx power. 100% indicates full power.
Short Preamble Enable or disable short preamble. The default
setting is Disable.
Preamble defines the length of CRC correction
block for wireless devices. Short preamble adopts
56-bit synchronization field. The network whose