93
This page is used to configure wireless advanced properties.
The parameters of Advance Configuration are described as follows:
Field Description
Wireless Mode
(Infra)
The wireless modes include:
802.11 B/G mixed mode
802.11 B Only
802.11 G Only
The default wireless mode is 802.11 B/G mixed
mode.
Country Region
Code
Select the proper country region code. For
example, America’s (FCC) channel range is 1~11.
Europe (ETSI) channel range is 1~13.
B/G Protection If 802.11b and 802.11g coexist on your network, it
is recommended you enable this option. In this
way, the probability of data collision will be
reduced, but the transmission efficiency will also
be reduced.
You may select Auto, On, or Off.
Auto: If selecting this option, AP enables or
disables the B/G protection mode according
to the network status.
To Next Page
Loading...
Need help?
General
