103
Field Description
802.11 GN mixed mode
802.11 B/G/N mixed mode
The default wireless mode is 802.11 B/G/N mixed
mode.
Country Region
Code
Select the proper country region code. For
example, America’s (FCC) channel range is 1~11.
Europe (ETSI) channel range is 1~13.
B/G Protection If 802.11b and 802.11g coexist on your network, it
is recommended you enable this option. In this
way, the probability of data collision will be
reduced, but the transmission efficiency will also
be reduced.
You may select Auto, On, or Off.
Auto: If selecting this option, AP enables or
disables the B/G protection mode according
to the network status.
On: Enable the B/G protection mode.
Off: Disable the B/G protection mode.
Tx Rate You may select a proper data rate in the drop
down list. You may also leave it blank.
If selecting Auto, AP will automatically judge the
data rate. If selecting a higher data rate, the
transmission distance will be shorter.
Tx Burst Enable or disable Tx Burst. After enabling this
option, the transmission efficiency can be
improved.
HT Physical Mode
When the wireless mode is 802.11 N Only, 802.11GN mixed mode, or 802.11B/G./N
mixed mode, you may set the parameters of HT physical mode.
To Next Page
Loading...
Need help?
General
