Getnet GR-534W User Manual

90
Step1 Click Internet > LAN to display the Local Area Network (LAN) Settings
page. Set the IP address of AP2 to be 192.168.1.2.
Step2 On the Basic Wireless Settings page, set the WDS mode to be Bridge
Mode and enter the MAC address of the AP1.
5.5 Wireless Settings (WISP Mode)
In the WISP mode, the following figure shows the navigation menu of the Wireless
settings:
In the WISP mode, the sub-menus of the Wireless Settings include Profile, Link
Status, Site Survey, Statistics, Advance, QoS, 11n Configuration, WPS and

Getnet GR-534W Specifications

General

Brand	Getnet
Model	GR-534W
Category	Wireless Router
Language	English