20
the wireless devices can connect to the AP.
After finish the settings, click the Apply button to apply the settings.
4.2 Quick Start in the Gateway Mode
In the gateway mode, the GR-534W accesses the Internet by ADSL or cable modem,
and several users share the IP address provided by the ISP on your network.
In the gateway mode:
NAT is enabled.
WAN interface can be connected to the Internet by STATIC (fixed IP),
DHCP (Auto config), PPPoE (ADSL), L2TP, and PPTP.
If you want to configure GR-534W working in gateway mode, do as follows:
Click Operation Mode to display the Operation Mode Configuration page.
On the Operation Mode Configuration page, choose the Gateway mode, and then
To Next Page
Loading...
Need help?
General
