107
This page is used to configure the parameters of 802.11n in the station mode.
The parameters of this page are described as follows:
Field Description
MPDU Aggregation Enable or disable MPDU (Message Protocol Data
Unit) aggregation. A-MPDU aggregates the
MPDUs that are encapsulated by 802.11
message. MPDU is data frame that is
encapsulated by 802.11. By sending A-MPDU, it
decreases PLCP Preamble and PLCP Header
that are needed to send an 802.11 message, and
the system throughput is improved.
You may select Manual or Auto.
MPDU density
IF selecting Manual, you are allowed to set the
MPDU density.
Aggregation
MSDU(A-MSDU)
Enable or disable A-MSDU.
MSDU is the aggregation of multiple MSDUs by
using some methods and the multiple MSDUs
form a greater load. MSDU can be considered as
Ethernet message. Usually, when AP or wireless
client receives MSDUs from protocol stack, the
MSDUs will be marked with the Ethernet message
header (also called A-MSDU Subframes). Before
sending them out, the A-MSDU Subframes need
to be transformed into the message format of
To Next Page
Loading...
Need help?
General
