64
The parameters on this page are described as follows:
Field Description
Aifsn Aifsn (Arbitrary Inter-Frame Space Number). This
parameter influences the delay time of WMM access
category. If you use voice or video service, you’d
better set this parameter to be smaller in the fields of
AC_VI and AC_VO. If it is E-mail or Web service,
you should set a bigger value in the fields of AC_BE
and AC_BK.
Cwmin Cwmin (Mini. Contention Window) also influences
the delay time of WMM access category. The
difference between AC_VI and AC_VO should be
smaller, but the difference between AC_BE and
AC_BK should be bigger.
Cwmax Cwmax (Max.Contention Window)
Txop Txop (Opportunity to Transmit) may optimize the
WMM access. Compared to the WMM access that
needs a higher priority, such as AC_VI and AC_VO,
this value should be bigger.
ACM ACM (Admission Control Mandatory) parameter
only reacts on AC_VI and AC_VO. If you set this
value to be 0, it indicates that AP is in the charge of
the access commands. If this value is 1, it means
the client is in the charge of the access commands.
Ackpolicy When WMM packets are transmitting, AP will
receive an echo request. If you set this value is 0, it
means AP does not send back an echo request,
which will bring positive effect for WMM. If this value
is 1, AP generates the response to the request.
- DLS (Direct Link Setup)
GR-534W provides DLS function. Suppose that there are two WMM devices. Enter
the MAC address of a WMM device in the DLS setting of the other device, and then
connect the two WMM devices to the GR-534W. In this way, these two WMM devices
can transmit message directly.
If you want to configure WMM DLS, do as follows:
Step1 Prepare two wireless network cards (A and B) and one GR-534W.
To Next Page
Loading...
Need help?
General
