Gewa G9 - Page 25

5 STARTING THE DEVICE
Connect the DC plug of the AC power adaptor to the DC IN jack on
the rear panel.
Connect the mains plug to the electrical outlet.
With the cord connected correctly the [Power] button lights up in red. The device is in stand-
by mode and ready to be explored. Press the [Power] button to boot the apparatus.
Wait for the device to boot
Note: In order to save energy, the G9 provides an “Auto Power” feature. With this function, the
Workstation will shut down automatically being left it idle for more than 30 (default) minutes.
Change this property in General Settings ➔ Module 4 ➔ Device ➔ Auto Off