Gewa G9 - Renaming Presets

If you choose direct storage of parameter values proceed as follows:
1. Go to either
Performance ➔ Module 1 ➔ Drum Kit
or
Kit Editor ➔ Module 2 ➔ Instrument Select ➔ Drum Kit
2. An asterisk (*) before the kit name indicates changes in directly storable values.
3. Tap the [Drum Kit] name field to open the Drum Kit Browser.
4. Choose one of the following options:
a. Overwrite an existing kit by selecting its name in the list and tapping [Save].
b. Create a new kit by tapping [New] in the Feature Shelf, enter a name and confirm
by tapping [OK].
10.4.4 PRESET OVERWRITE
You can overwrite user presets with current values set in the interface. This function is not available
for factory presets (preceding lock icon).
1. Tap the [Preset] field.
2. Tap on the preset name to be overwritten.
3. Tap [Save] in the Feature Shelf.
10.4.5 RENAMING PRESETS
Renaming a preset will affect the preset name only and retain individual parameter values. This
option is only available for user presets (without preceding lock icon).
1. Tap the [Preset] field.
2. Tap once on a preset name in the drop- down list.
3. Tap [Rename] in the Feature Shelf.
4. Enter a name for the new preset using the keyboard.
5. Confirm by tapping [OK].
10.4.6 DELETING USER PRESETS
Proceed as follows:
1. Tap the [Preset] field.
2. Tap once on a preset name in the drop-down list.
3. Tap [Delete] in the Feature Shelf.