ECturn
3
Symbols and means of representation
Symbols and means of representation1
Warnings
In these instructions, warnings are used to warn against material damage and injuries.
Always read and observe these warnings.
X
Observe all the measures that are marked with the warning symbol and warning word.
X
Warning
symbol
Warning word Meaning
WARNING
Danger for persons.
Non-compliance can result in death or serious injuries.
CAUTION
Danger for persons.
Non-compliance can result in minor injuries.
–
CAUTION
Information on avoiding material damage, understanding a concept or optimising the
processes.
Further symbols and means of representation
Important information and technical notes are emphasised in order to illustrate the correct operation.
Symbol Meaning
means "important note"
means "additional information"
X
Symbol for an action: Here you have to do something.
Observe the sequence if there are several action steps.
X
Product liability2
In accordance with the liability of the manufacturer for his products as dened in the German "Produkthaftungs-
gesetz" (Product Liability Act), the information contained in this brochure (product information and proper use,
misuse, product performance, product maintenance, obligations to provide information and instructions) is to be
observed. Non-compliance releases the manufacturer from his statutory liability.
Safety3
Intended use3.1
The ECturn swing door drive is designed for the automatic opening and closing of swing-door single action
doors.
The ECturn swing door drive is suitable:
solely for use in dry rooms à
in entrances and interior areas of pedestrian trac in commercial plants and public areas à
in private areas. à
The ECturn swing door drive
may not be used at re or smoke proof doors, à
may not be used for hazardous areas. à
Any other use than the proper use, such as permanent manual operation, as well as all changes to the product
are impermissible.
To Next Page
Loading...
Need help?
General
