Hardware Installation - 12 -
1-2 Product Specications
CPU AMD EPYC™ 7002 series processor family
Single processor, 7nm, Socket SP3
Up to 64-core, 128 threads
NOTE: If only 1 CPU is installed, some PCIe or memory functions might be
unavailable.
Chipset
System on Chip
Memory 16 x DIMM slots
DDR4 memory supported only
8-channel memory architecture
RDIMM modules up to 64GB supported
LRDIMM modules up to 128GB supported
Memory speed: Up to 3200 MHz w/1DPC, 2933MHz w/2DPC
LAN 2 x 1Gb/s LAN ports (Intel® I350)
1 x 10/100/1000 management LAN
Expansion Slot 1 x Riser card:
- 1 x CRS101D
* 1 x Full-height half-length slot with PCIe x16 (Gen4 x16 bus) slot
1 x OCP mezzanine slots with PCIe Gen3 x16 bandwidth (Type1, P1, P2, P3,
P4; Type2 P5 with NCSI supported)
2 x M.2 slot:
- M-key
- PCIe Gen3 x4
- Supports NGFF-2242/2260/2280 cards
Video Integrated in Aspeed® AST2500
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM
Storage
(R12-Z30)
4 x 3.5" SAS/SATA hot-swappable HDD/SSD bays
SAS card is required for SAS devices support
(R152-Z31) 8 x 2.5" SAS/SATA, 2 x 2.5" U.2 hot-swappable HDD/SSD bays
SAS card is required for SAS devices support
(R152-Z32) 10 x 2.5" U.2 hot-swappable HDD/SSD bays
SAS Supported via add-on SAS Card
To Next Page
Loading...
Need help?
General