Template Module, Version 1.2, 11.09.2018,
Extending the functionality of the phone
Gigaset A690-A690A/AS690-AS690A / LUG-Kombi UK-IE/IM-Ost/GR en / A31008-M2816-L101-1-7619 / extending.fm / 2/26/
30
Extending the functionality of the phone
Multiple handsets
Up to four handsets can be registered with the base.
Every device is assigned an internal name and internal number (INT 1 – INT 4). The assignmen
t
can be changed.
All internal numbers are already assigned: de-register any devices no longer needed
Registering a handset
Register HS or Put into base flashes on the display.
Registering by placing the handset in the base
¤ Place the handset in the base . . . Registering is shown on the display, the handset is regis-
tered automatically
Registering from the menu
On the handset
¤ Menu Settings OK Handset OK Register HS Enter the system PIN
of the base (default: 0000) OK The display shows Registering.
On the base
¤ Within 60 seconds of entering the system PIN, press and hold the registration/paging key for
a minimum of 3 seconds.
De-registering a handset
You can de-register any other registered handset from any registered Gigaset handset.
¤ Menu Settings OK Handset OK De-register HS OK
Select the internal user to be de-registered.
The handset you are currently using is marked with < OK Enter the system PIN of
the base (default: 0000) OK . . . Put into base flashes on the display, the handset is de-
registered
Registration must be initiated both on the base and on the handset. Both must be
within 60 seconds.
The registration process takes about 1 minute. Handsets are assigned the lowest avail-
able internal number (1 to 4). If internal numbers 1 to 4 are already assigned to other
devices, number 4 is overwritten.
To Next Page
Loading...
