Gigaset A690A - System Settings

Template Module, Version 1.2, 11.09.2018,
Phone settings
Gigaset A690-A690A/AS690-AS690A / LUG-Kombi UK-IE/IM-Ost/GR en / A31008-M2816-L101-1-7619 / settings.fm / 2/26/19
36
System
Changing the system PIN
¤ Menu Settings OK Base OK System PIN OK Enter the
current 4-digit system PIN (default: 0000) OK Enter the new 4-digit system PIN OK
Resetting the system PIN
Resetting the base to the original PIN code 0000:
¤ Unplug the network cable from the base press and hold the Registration / paging key on
the base
at the same time reconnect the network cable to the base press and hold the
key for at least 5 seconds . . . the base is reset and the system PIN is set to 0000
Resetting the handset
You can reset individual settings. Entries in the directory and call list, and the handset’s registra-
tion to the base, are maintained.
¤ Menu Settings OK Handset OK Reset Handset OK Reset?
OK
Resetting the base
A reset disables mode No Radiation , , resets individual settings and deletes all lists.
The system PIN is reset to the original code 0000.
Th
e time and date are not affected. The answer machine (if available) is not ready until after
about 15 s
econds after the base is reset.
Resetting the base from the menu
The handsets remain registered. The system PIN is not reset.
¤ Menu Settings OK Base OK Base Reset OK Reset? OK
Resetting the base using a key on the base
All handsets are de-registered. The system PIN is set back to the original code 0000.
¤ Unplug the power cable from the base Keep pressed the Register/Paging key on the
base At the same time, reconnect the power cable to the base Keep the key pressed
for at least another 5 seconds
All handsets are de-registered and must be re-registered. All settings are reset to the
defaults.