Template Module, Version 1.2, 11.09.2018,
Getting started
Gigaset A690-A690A/AS690-AS690A / LUG-Kombi UK-IE/IM-Ost/GR en / A31008-M2816-L101-1-7619 / starting_Kombi.fm /
10
Setting up the handset for use
The display is protected by a plastic film. Please remove the protective film.
Inserting the batteries
Charging the batteries
¤ Before using batteries the first time, fully charge them in
the base or charging cradle.
The batteries are fully charged when the battery icon
disappears from the display.
Changing the display language
You can change the display language, if the phone has been set to an incomprehensible
language.
¤ Menu Press the keys slowly in succession . . . the language set
(e.g.English) is displayed
¤ Select a different language: Press the control key until the language required is
selected on the display, e.g. Francais OK ( = selected)
Only use rechargeable batteries, as this could otherwise result in significant health
risks and personal injury. For example, the outer casing of the batteries could be
damaged beyond repair or the batteries could explode. The device could also
malfunction or be damaged as a result of using batteries that are not of the recom-
mended type.
¤ Insert the batteries with
the polarity in the right
direction (refer to the
picture for +/- positions).
¤ Fit the battery cover from
the top.
¤ Push the cover closed until
it clicks into place.
To re-open the battery cover:
¤ Grip the notch on the
cover and slide it down-
wards.
Batteries can heat up during the charge process. This is not dangerous.
Over time, the charging capacity of the batteries will decrease for technical reasons.
Handsets contained in the package have already been registered to the base. If a
handset has not been registered however (Register HS or Put into base is displayed),
please register it manually ( page 30).
To Next Page
Loading...
