Gigaset N720 DECT IP User Manual

25
Operating information
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-2-7619 / using.fm / 06.02.2012
Version 2, 06.08.2010
Resetting to static IP addresses
¤ Press the reset button and hold it for four seconds.
¤ Release the reset button.
¤ Press the reset button again for four seconds.
¤ Release it again.
The reset is carried out. The IP configuration is now set as follows:
Resetting to dynamic addressing (DHCP)
This allows you to specify that the DECT Manager will automatically receive an IP address
from a DHCP server in the local network.
¤ Press the reset button and hold it for four seconds.
¤ Release the reset button.
¤ Press the reset button for one second.
¤ Release it again.
¤ Press the reset button again for four seconds.
¤ Release it again.
The reset is carried out. The IP configuration is set as follows.
Parameter Value for the reset
IP address type Static
IP Address DECT Manager 192.168.143.1
Subnet mask 255.255.0.0
Default Gateway 192.168.1.1
Preferred DNS server, Alternate DNS server 192.168.1.1
Password for access to the Web configurator admin
VLAN Tagging Off
Parameter Value for the reset
IP address type Obtained automatically
Password for access to the Web configurator admin
VLAN Tagging Off

Gigaset N720 DECT IP Specifications

General

Brand	Gigaset
Model	N720 DECT IP
Category	Telephone Accessories
Language	English