92
Configuring the system on the DECT Manager
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-2-7619 / web-conf.fm / 06.02.2012
Version 2, 06.08.2010
¤ Enter all the data for your LDAP server:
Directory via XML protocol
If a corporate directory is provided via an XML server, you will need the access data to set
it up.
¤ Enter a name in the Directory name field. This is the name under which the directory
will be displayed on the handsets.
¤ Enter the XML server details.
Enable a private online directory
¤ If a private directory is available on the server in XML format, activate it and enter a
name for the directory. The private directory must be provided via the same server as
the XML directory.
Saving settings
¤ Click on Set to save your settings on the page.
Device management
Date and time
By default, the DECT Manager is configured so that the date and time are transferred from
a time server on the Internet.
Changes to the settings for the time server and activating/deactivating the
synchronisation are done via the Web page:
Settings
¢ Management ¢ Date & Time
Server address IP address for the LDAP server in your network.
Server port Port number that is used to provide the LDAP service. The
default setting is 389
Base Distinguished
Name
Entry at which the directory display/search is to begin.
Username Access ID for the LDAP server.
Password Password for the access ID to the LDAP server.
Server address IP address for the directory.
Username Access ID for the directory.
Password Password for the access ID to the directory.