Gigaset N720 DECT IP User Manual

40
Using directories
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-2-7619 / directories.fm / 06.02.2012
Version 2, 06.08.2010
Using corporate directories
You can use directories made available by a server in the corporate network on your
handset. The following formats are possible:
u Directory in LDAP format (LDAP = Lightweight Directory Access Protocol)
u Directory in XML format
u Personal directory in XML format
Prerequisite:
u The directories are available in the valid XML or LDAP format.
u They are configured and enabled on the DECT Manager (£ page 91).
Opening the directory
Prerequisite: The handset is in idle status.
u Press the control key (INT).
The directory opened is the one set to be opened via the INT key in the DECT Manager for
your handset (£ page 77).
Or:
v ¢ ÂContacts ¢ Network Directory
All available online directories are displayed.
q Select a directory and press §OK§.
Searching for and displaying an entry
q Scroll to the required entry.
Or:
~ Enter the name (or first few letters).
As soon as you press a key on the keypad, the phone goes into search mode.
You can enter up to eight characters. The first entry in the list which matches
your entry is displayed.
q If there are several matching entries, scroll to the desired entry.
¤ Press the display key §View§ or w to display the entry.
Dialling a number from a corporate directory
The corporate directory is opened using the INT key u(press left on control key).
u Open a corporate directory.
q Select an entry.
c Press the talk key. The number is dialled.
You hear the busy tone if:
u The phone being called is not available (handset switched off, out of range).
u The call is not answered within a certain time (specified on the PABX).

Gigaset N720 DECT IP Specifications

General

Frequency Range	1880-1900 MHz
Caller ID	Yes
Call Waiting	Yes
Conference Calls	Yes
Connectivity	Ethernet
Protocols supported	SIP
Codecs	G.711, G.729