Gigaset N720 DECT IP User Manual

32
Making calls
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-2-7619 / telephony.fm / 06.02.2012
Version 2, 06.08.2010
Display with CNIP
Display with CNIP and CLIP
Notes on phone number display (CLIP)
By default, the number of the caller is shown on the handset of your Gigaset telephone.
You do not have to make any other settings on your Gigaset telephone.
However, if the caller's number is not displayed, this can be due to the
following:
u You have not requested CLIP from your provider
u The PABX connected to the Gigaset N720 DECT IP Multicell System is not forwarding
all the information.
¤ Check the CLIP (phone number display) settings of your PABX and activate this
function if necessary. In the user manual for the device, search for the term "CLIP" (or
an alternative term such as "calling line identification", "phone number identification",
"caller ID" etc.). If necessary, contact the device manufacturer/supplier.
¤ Check whether your provider supports phone number display (CLIP) and that the
function has been activated for you. If necessary, contact your provider.
If you have CNIP, the CNIP information
registered with your provider for the
caller's number will be displayed, e.g.,
the name and, if applicable, the location.
If CLIP and CNIP are activated, the
respective details are displayed one
below the other.
If the number of the caller is stored in
your directory, the CLIP display is
replaced by the corresponding directory
entry.
Ø«Ú
Doe, John,
Berlin
Reject Silence
CNIP text, e.g.,
name and location
Ø«Ú
1234567890
Doe, John,
Berlin
Reject Silence
CNIP text
CLIP information

Gigaset N720 DECT IP Specifications

General

Brand	Gigaset
Model	N720 DECT IP
Category	Telephone Accessories
Language	English