GigE MotionBLITZ EoSens mini1 - Page 26

ExposureMode
This feature is used to set the operation mode of the exposure (or shutter). Cur-
rently there is only timed exposure available. The exposure duration time is
defined by the feature ExposureTimeAbs.
Access Read / write
Interface IEnumeration
Unit --
Range Timed
Invalidation --
Precondition CameraState = Idle
ExposureTimeRaw
This feature is used to set the exposure time in multiples of microseconds
when ExposureMode is timed. This controls the duration where the pho-
tosensitive cells are exposed to light.
Access Read / write
Interface IInteger
Unit microseconds - µs
Range 2…ExposureTimeMax, Inc. 1
Invalidation --
Precondition CameraState = Idle or Live
Note The max. exposure time depends of the current frame
rate
Feature description
MikrotronGmbH / mini1 / CAMMC1370/71-RG / 2021 26 - 67