RecordTrailer
This feature defines the number of trailing frames to capture after recording
stopped. This feature defines the number of frames to record after a record
stop trigger is detected. The default value is 0.
Access Read / write
Interface IInteger
Unit number of pictures
Range 0… (RecordMaxFramesPerSequence-1)
Invalidation --
Precondition CameraState = Idle, RecordMode = Continuous
Note only for continuous recording; if RecordMode = single,
the feature will be locked and the value will be invalid.
RecordMaxFrames
This feature returns the maximum possible frames of all sequences. This is
the number of frames that can be recorded for all sequences in sum.
Access Read only
Interface IInteger
Unit number of pictures
Range --
Invalidation --
Precondition --
Note The maximal number of frames depends on the frame
size.
Feature description
MikrotronGmbH / mini1 / CAMMC1370/71-RG / 2021 39 - 67
To Next Page
Loading...