THE ADVANCED SWITCHING SYSTEM
THE GIGRIG G3 USER MANUAL
4.3 CHANGING BANKS
You can access G3’s 99 Banks in one of three ways:
1. The ‘Bank Selects’ push button on the
top panel. Pressing it once will scroll up the
Banks and pressing and holding will scroll
down the Banks. (Please note that
whichever preset you are on you will stay
on until you have selected a new preset in
your newly chosen bank).
2. Back Panel Bank Remote - connect the GigRig Bank Manager or any momentary
switch to the back-panel bank socket to access G3 banks (this needs to be activated
in the Deep Edit Menu under Global Settings). Again, press the Bank switch once to
go up, press and hold to go down.
3. Footswitch Assign – In the deep edit menu (in global settings), you have the option to assign a
footswitch to act as a Bank Up or Bank Down.
To Next Page
Loading...
