THE ADVANCED SWITCHING SYSTEM
THE GIGRIG G3 USER MANUAL
5.2 - NAMING PRESETS
To edit the preset name, select NAME in the deep edit menu and press footswitch 4 You will see the
flashing cursor on the selected letter.
Move the cursor across using (4) button. You can scroll up and down
through the character set using (1) (2)
Once you are done, either use (3) to get back to the main menu or press
to exit deep edit.
* You can also name the presets using the G3 APP. Once you’ve done a backup, you’ll see the option the EDIT
that backup. Simply enter the names of your presets then restore back up.
6. MIDI
G3 features innovative MIDI capability, enabling you to send up to 20 MIDI messages per preset, as well as a
built in MIDI sequencer.
We now have the following MIDI modes available:
PC+: Adds a PC (Programme Change) message to the preset.
CC+: Adds a CC (Continuous Control) message to the preset.
PC~: Sends a PC message when you turn off a StompBox mode preset with a second press.
CC~: Sends a CC message when you turn off a StompBox mode preset with a second press.
PC–: Sends a PC message when you leave the preset.
CC–: Sends a CC message when you leave the preset.
PCs: Sends a PC message as part of the MIDI sequencer.
CCs: Sends a CC message as part of the MIDI sequencer.
PC* & CC*: This mode is to specifically link two G3s together which enables them to control each other.
G3’s MIDI capability allows you to send up to 20 individual MIDI messages on
each preset. These can be PC (Programme Change), CC (Control Change) or
EXP (Expression Pedal) MIDI messages.
G3 also has a 20 step MIDI Sequence, MIDI Clock and a separate MIDI Tap
Tempo feature.
To Next Page
Loading...
Need help?
General
