THE ADVANCED SWITCHING SYSTEM
THE GIGRIG G3 USER MANUAL
c. Select Parallel End and Select NO JOIN.
d. Select parallel Loops and select Loops 7 and 11.
EXAMPLE 3 - PARALLEL WITH STEREO
This is basically the same as your Wet/ Dry rig, where you have parallel end to ‘no join’. Any stereo effects that
you add from this will be added into the signal path, keeping the signal path separate. It’s important that the
effect be true stereo with LEFT and RIGHT inputs.
EXAMPLE 4 - STEREO INPUT
This new feature enables you to send a stereo signal into G3 (via a TRS cable) and maintain the stereo signal
throughout the G3.
To do this, simply choose SPLIT BEFORE INPUT within the parallel start sub menu and within the parallel end
sub menu NO JOIN. Now you can choose which effects apply to which side of the stereo signal.
5.2.8 TAP TEMPO
To Next Page
Loading...
Need help?
General
