THE ADVANCED SWITCHING SYSTEM
THE GIGRIG G3 USER MANUAL
SONG / BANK – This enables you to use numbers or song titles to name each bank.
NUMBER OF BANKS – Select the number of banks you wish to use from 1-99.
BANK EXT SWITCH – Use this to activate the external jack socket (located on the back of G3). Then use any
momentary footswitch to act as a bank switch.
BANK UP – This is used to set a footswitch into a bank up switch.
BANK DOWN – This is used to set a footswitch into a bank down switch.
BLUETOOTH – This allows you to connect the G3 to our G3 iOS App.
UPDATE – Use this to download the latest software into your G3.
SAVE BACKUP – Use this feature to save all your presets to the G3 iOS App.
HIDDEN PRESET - This is a master Hidden Preset button. If you turn this off it will disable all your hidden
presets. This feature must be turned on to use hidden presets.
STEREO PAIRS - G3 has 12 x mono loops which you can pair to use with your stereo effects giving you up to 6
stereo loops. For example, if you have 1 x stereo reverb at the end of your chain, pairing loops 12 and 11 will
give you 1 stereo loop, leaving you with 10 x mono loops. If you have 3 x stereo loops, pairing 12 & 11, 10 & 9,
and 8 & 7, will give you 3 x stereo loops and 6 x mono loops.
GLOBAL PHASE - Global Phase sets up the polarity of the phase on Output 2. This is specifically to avoid
problems when adding an in-phase pedal in STOMPBOX Mode to an out of phase signal.
BACKLIGHT - G3’s back-lit, High Res, TFT, LCD screen has 4 levels of brightness to choose from. This is
particularly useful within the Atom.
STATUS BAR - Here you can turn the visibility of the Status Bar on the Preset screen On and Off.
RESTORE BACKUP – Use this to load presets fro the G3 iOS App back onto the G3.
LOAD SONG LIST – Use this to load a song list from the G3 iOS App.
BANK OFFSET – This is used to set a minimum bank. This is useful if you play in multiple bands and don’t want to
scroll through every bank in G3.
This will provide a quick view of the active functions within your Preset. Inactive functions will be displayed in
grey. Active functions are displayed in white.
To Next Page
Loading...
Need help?
General
