Gill Instruments Windobserver 65 - Ox - ASCII Output Format (Output String Padding); Px - Output Rate; Q- Measurement Mode; Tx - Analogue Output Voltage or Current Settings (if Fitted)

Gill Instruments Ltd
_____________________________________________________________________________________________________________
________________________________________________________________________________________________
WindObserver 65 Page 50 Issue 4
Doc. No. 1390-PS-0039 June 2016
Ox – ASCII Output Format (Output String Padding)
Setting
Configuration code
Comma Separated Variable (CSV)
O1
Fixed Field
O2
Example data strings:-
POLAR
NMEA
CSV
data changing to error status code
condition.
CSV
data changing to error status code
condition.

A,235,000.77,M,00

,
0A
$IIMWV,191,R,000.55,M,A*19


A,,,M,04,
24
$IIMWV,,R,,M,V*29
Fixed Field
data changing to error status
code condition.
Fixed Field
data changing to error status
code condition.


A,266,000.73,M,00,
08
$IIMWV,191,R,000.55,M,A*19


A,999,999.99,M,04,
0A
$IIMWV,999,R,999.99,M,V*07
Px - Output Rate
Outputs per second
1
2
4
5
8
10
Configuration code
P1
P3 P2 P4 P5 P6
Q- Measurement Mode
See Section 8.3.
RWASHORT XX (Short term number)
Where XX = 10 to 60, associated with Mode 14 and Mode 15 averaging.
RWALONG XX (Long term number)
Where XX = 1 to 10, associated with Mode 14 and Mode 15 averaging.
Tx - Analogue Output Voltage or Current settings (if fitted)
Setting
Configuration code
Voltage (0 to 5V)
T1
Voltage (
–
2.5V to +2.5V)
T2
Current (4
-
20mA
)
T3
Ux – Digital Output Units
Units
metres/sec
(m/s)
knots
(knots)
miles / hour
(MPH)
kilometre/hour
(kph)
feet / minute
(fpm)
Configuration
code
U1
U2 U3 U4 U5