Giropes Baxtran ABS - Date Setting

93
ENUSER’S MANUAL ABS
7.3 DATE SETTING
Operator can setup machine date by setting menu.
INSTANCE
KEY (ORDER) STEP EXPLANATION
LCD SCREEN
DISPLAY
MENU LEVEL
AND CODE
Press and Hold [CAL]
Key
1. Display Menu
--node-
1 .
Short Press [MENU]
Key
2. Enter Into Setting Menu
-bASE-
2.
Short Press [CAL]
Key
3. Display weighing range and precision menu
-SCALE-
2.1.
Short Press [MENU]
Key Two Times
4. Enter Into Date Setting
-dATE-
2.3
Short Press [CAL]
Key
5. Display Year
• Operator can set year by:
Press [UNIT] key to move cursor and press [PRINT] to
cycle and select number.
YEAr-14
2.3.1
Short Press [MENU]
Key
6. Display Month
• Operator can set month by:
Press [UNIT] key to move cursor and press [PRINT] to
cycle and select number.
MOM--O5
2.3.2
Short Press [MENU]
Key
7. Display Day
• Operator can set day by:
Press [UNIT] key to move cursor and press [PRINT] to
cycle and select number.
dAY--10
2.3.3
Short Press [CAL]
Key
8. Confirm the date and return to previous menu
-dATE-
2.3
Short Press [TARE]
Key Two Times
9. Finish Setting and return to Standby Key Two
NOTE: The grey color words explain the signal’s meaning which flash on the window..