Giropes Baxtran ABS - Weighing Configuration; Zeroing Range Setting; Sensitivity Level Setting

ENUSER’S MANUAL ABS
98
9. WEIGHING CONFIGURATION SETTING
INSTANCE
KEY (ORDER) STEP EXPLANATION
LCD SCREEN
DISPLAY
MENU LEVEL
AND CODE
Press and Hold
[MENU] Key
1. Display Menu
--nodE-
1 .
Short Press [MENU]
Key Three Times
2. Enter Into configuration setting
-SEtUP-
4 .
Short Press [CAL]
Key
3. Enter into Zeroing Range Setting
• Press [PRINT] key can set Zeroing Range from 0.0 to 6.0
ZEro-00
4.1.
Short Press [MENU]
Key
4. Enter into tracking Range Setting
• Press [PRINT] key can set Tracking Range from 0.0 to 6.0
StdY-05
4.2
Short Press [MENU]
Key
4. Enter into sensitivity level setting
• Press [PRINT] key can set Sensitivity Level from 0.0 to
6.0
SENS--1
4.3
Short Press [MENU]
Key
4. Enter into speed level setting
• Press [PRINT] key can set Speed Level I from 1 to 3
SPEEd-2
4.4
Short Press [MENU]
Key
4. Enter into Anti-vibration level setting
• Press [PRINT] key can set Anti-Vibration level from 1 to 7
FILt--1
4.5
Short Press [CAL]
Key
5. Confirm the setting and return
-SEtUP-
4.
Short Press [TARE]
Key
6. Finish the setting and return to standby
--bASE-
NOTE: The grey color words explain the signal’s meaning which flash on the window..