Giropes Baxtran ABS - Machine Configuration Restore; Factory Reset Procedure

99
ENUSER’S MANUAL ABS
10. RESTORE THE MACHINE CONFIG
PURPOSE
Operator can restore the machine to factory setting by input the code in menu.
KEY (ORDER) STEP EXPLANATION
LCD SCREEN
DISPLAY
MENU LEVEL
AND CODE
Press and Hold
[MENU] Key
1. Display Menu
--nodE-
1 .
Short Press [MENU]
Key Four Times
2. Enter Into restore factory setting function
-ConFIG
5 .
Short Press [CAL]
Key
3. Enter Into the input code
• Press [UNIT] key to move the cursor and press [PRINT]
key to select the number. THE CODE IS: 8888
Cod0000
5.1
Short Press [CAL]
Key
4. Confirm and return to previous menu
-ConFIG
5.
Short Press [TARE]
Key
5. Finish Setting and return to standby
!
For the convenience of operator remember the code, the restore factory setting code all is: 8888. Operator can not set other code.
NOTE: The grey color words explain the signal’s meaning which flash on the window..