Giropes Baxtran ABS - Gross;Net;Tare Weighing Function

81
ENUSER’S MANUAL ABS
6.4 GROSS / NET / TARE WEIGHT WEIGHING FUNCTION
G / N / T WEIGHT WEIGHING INSTANCE
PURPOSE
Weighing the target sample’s weight or quantity in or out the setting limit and alarm.
KEY (ORDER) STEP EXPLANATION LCD SCREEN DISPLAY
MENU LEVEL
AND CODE
Press and Hold
[MENU] Key
1. Enter Into Menu
--node-
1 .
Short Press [CAL] Key 2. Display counting mode
-COUNT-
1 .1 .
Short Press [MENU]
Key Three Times
3. Display G/N/T weight weighing mode
Flash the G/N/T signal on the left side of window
-GNT-
1 .4 .
Short Press [CAL] Key 4. Enter into G/N/T mode
SAMPLE
1 .4.1
Short Press [CAL] Key 5. The display flash to remind to put the tare weight of sample
SAMPLE
1 .4.1 .1
6. Put tare weight of sample on pan
SAMPLE
Short Press [CAL] Key
7. Confirm the tare weight (Example 200g)
• Three position to display as:
Upper left display gross weight200g, Upper right display
tare weight 200g, Main window display 0.000g
8. Put samples on pan and machine will display result (exam-
ple: 25.3g)
• Three position to display as:
Upper left display gross weight 225.3g, Upper right
display tare weight 200g, Main window display net weight:
25.300g
Press and Hold [TARE]
Key
9. Exit G/N/T weight weighing function
Quick restart: exit the present computing price and restart the new one. Press and hold (MENU) key can restart the step 1, short press (CAL)
to enter into step 3.
NOTE: The grey color words explain the signal’s meaning which flash on the window.