Giropes Baxtran ABS - Language Setting; Communication Setting; Turn On;Off the Communication Data; Print Data Frames Format

97
ENUSER’S MANUAL ABS
7.8 LANGUAGE SETTING
Operator can set some function’s interface with Chinese or English language by setting this menu.
KEY (ORDER) STEP EXPLANATION
LCD SCREEN
DISPLAY
MENU LEVEL
AND CODE
Press and Hold
[MENU] Key
1. Display Menu
--node-
1 .
Short Press [MENU]
Key
2. Enter Into Setting Menu
-bASE-
2 .
Short Press [CAL]
Key
3. Display weighing range and precision menu
-SCALE-
2.1.
Short Press [MENU]
Key seven times
4. Enter into Language setting and flash “Cn” (Chinese)
LANG-Cn
2.8
Short Press [PRINT]
Key
5. Flash “En” and language switch to English
LANG-En
2.8
Short Press [CAL]
Key
6. Confirm the setting and return
--bASE-
2 .
Short Press [TARE]
Key
7. Finish the setting and return to standby
NOTE: The grey color words explain the signal’s meaning which flash on the window..
8. COMMUNICATION SETTING
8.1 TURN ON/OFF THE COMMUNICATION DATA
Not avaliable for ABS 3kg or 6 kg.
8.2 PRINT DATA FRAMES FORMAT
Not avaliable for ABS 3kg or 6 kg.