Giropes Baxtran ABS - Time Setting

ENUSER’S MANUAL ABS
94
7.4 TIME SETTING
Operator can setup machine date by setting menu.
INSTANCE
KEY (ORDER) STEP EXPLANATION
LCD SCREEN
DISPLAY
MENU LEVEL
AND CODE
Press and Hold
[MENU] Key
1. Display Menu
--node-
1 .
Short Press [MENU]
Key
2. Enter Into Setting Menu
-bASE-
2 .
Short Press [CAL]
Key
3. Display weighing range and precision menu
-SCALE-
2.1.
Short Press [MENU]
Key Three Times
4. Enter Into Time Setting Mode
-TIME-
2.4
Short Press [CAL]
Key
5. Display Hour
• Operator can set hour by:
Press [UNIT] key to move cursor and press [PRINT] to
cycle and select number.
Hour-20
2.4.1
Short Press [MENU]
Key
6. Display Minutes
• Operator can set second by:
Press [UNIT] key to move cursor and press [PRINT] to
cycle and select number.
MIN--15
2.4.2
Short Press [MENU]
Key
7. Display Second
• Operator can set second by:
Press [UNIT] key to move cursor and press [PRINT] to
cycle and select number.
SEC--50
2.4.3
Short Press [MENU]
Key
8. Display Time Mode
• Operator can press [PRINT] key to select 24 hours or 12
hours.
H----24
2.4.4
Short Press [CAL]
Key
9. Confirm the Time and return
-TIME-
2.4
Short Press [TARE]
Key two Times
9. Setting finished and return to standby
NOTE: The grey color words explain the signal’s meaning which flash on the window..