Global Fire Equipment // globalfire.pt
ma_gekko_01_010002_en_190522
The GEKKO Panel may be incorporated into a Chameleon
network. This also includes OCTO+, NODE+ or
CHAMELEON REP. RS422, Fibre-Optic or TCP/IP
connections may be used to connect them to a network.
Using CH1 and/or CH2 network connections port, the
GEKKO panel can be extended with one or two simple
Chameleon Display panels. RS422, Fibre-Optic or TCP/IP
connection may be used to connect them.
Extra Display
The Chameleon Display is commonly used when one or two simple display repeaters are needed
on a “not networked” GEKKO.
NOTE:
- Maximum two Chameleon Display connected.
- The Chameleon Display does not have a network address.
Chameleon Displays are installed in a similar manner to Control Panels.
Each GEKKO panel can supply a maximum of 2 Chameleon Display repeaters.
The Repeater should not be located where access to the internal components is restricted and where the unit is not exposed
to high levels of temperature, moisture, vibration and shock.
Avoid placing the Chameleon Display in direct sunlight as this may impair reading of the LCD display.
16
To Next Page
Loading...