Global BEAT-Tr - Page 41

USER MANUAL
Range BEAT-Tr
Edition: January 2016
Revision: No. 3
MODE OF USE - 41
C TRACEABILITY:
To modify the existing configuration of the option TRACEABILITY, proceed as follows:
WARNING !
This option might have restricted access. If enabled, the following screen
will appear initially:
OPERATOR: Enter the supervisor PIN number.
Once the supervisor code has been introduced and the START/VALIDATE button pressed,
the following screen that is directly shown that not having the restriction enabled:
TRACEABILITY
<YES>/<NO>
<YES> corresponds to the traceability identification
enabled whereas <NO> to disenabled.
Use the ¨ or § keys to shift from <YES> to <NO> or vice versa. Click the START /
VALIDATE key to accept the selection made. Click <STOP> to exit this option without
making a modification.
C SCRAPER BARCODE:
To modify the existing configuration of the option SCRAPER BARCODE, proceed as follows:
WARNING !
This option might have restricted access. If enabled, the following screen
will appear initially:
OPERATOR: Enter the supervisor PIN number.
Once the supervisor code has been introduced and the START/VALIDATE button pressed,
the following screen that is directly shown that not having the restriction enabled:
SCRAPED & CLEAN ?
<YES>/<NO>
<YES> corresponds to the scraper identification via
bar-code enabled whereas <NO> to disenabled.
Use the ¨ or § keys to shift from <YES> to <NO> or vice versa. Click the START /
VALIDATE key to accept the selection made. Click <STOP> to exit this option without
making a modification.