Global BEAT-Tr - Page 40

USER MANUAL
Range BEAT-Tr
Edition: January 2016
- MODE OF USE Revision: No. 3 40
SHOW
>COMPULSORY
Pressing START/VALIDATE key the current configura-
tion is showed.
COMPULSORY
<YES>/<NO>
<YES> enables the obligation and automatically makes
that the SHOW option shifts to <YES>.
Use the ¨ or § keys to shift from <YES> to <NO> or vice versa. Click the START /
VALIDATE key to accept the selection made. Click <STOP> to exit this option without
making a modification.
Finally, the latest option RESET allows to establishing the way to delete the job’s
identification entered.
COMPULSORY
>RESET
Pressing START/VALIDATE key the current configura-
tion is showed.
RESET
<YES>/<NO>
<YES> the job’s ID is deleted every time the unit is
switched off. <NO> with the change of date only.
Use the ¨ or § keys to shift from <YES> to <NO> or vice versa. Click the START /
VALIDATE key to accept the selection made. Click <STOP> to exit this option without
making a modification.
C AUXILIARY DATA:
To modify the existing configuration of the option AUXILIARY DATA, proceed as follows:
WARNING !
This option might have restricted access. If enabled, the following screen
will appear initially:
OPERATOR: Enter the supervisor PIN number.
Once the supervisor code has been introduced and the START/VALIDATE button pressed,
the following screen that is directly shown that not having the restriction enabled:
AUXILIARY DATA
<YES>/<NO>
<YES> corresponds to the auxiliary data identification
enabled whereas <NO> to disenabled.
Use the ¨ or § keys to shift from <YES> to <NO> or vice versa. Click the START /
VALIDATE key to accept the selection made. Click <STOP> to exit this option without
making a modification.