SECTION VIIA TECH 2 MAIN MENU & LIVE PLOT
2005 Tech 2 User’s Guide VII - 5
Tool Options
Selecting Tool Options from the Tech 2 Main Menu (see Figure VI-2) gives you the Tool Options menu
(Figure VIIA-3), leading to 10 major selections, as follows:
F3: TOOL OPTIONS
↓↓
↓↓
↓
F0: Set Clock
F1: Set Screen Contrast
F2: Set Units
(Metric or English)
F3: Self Test
F4: Set Training Center Mode
(Instructor or Student)
F5: Programming Tech 2
F6: Set Communication By-Pass Mode
F7: Make Duplicate PCMCIA Card
F8: Set Language
F9: CANdi Diagnostics
These features—described in more detail on the following pages—are useful for controlling various Tech 2
settings including the self tests and CANdi diagnostics.
Figure VIIA-3
Tool Options menu
Tool Options continued on next page...
To Next Page
Loading...