GMI GT series Users Handbooks

47
ALARM CONFIGURATION
The display will now highlight the next alarm
setpoint.
If required, this alarm setpoint can be altered as
before.
When complete, or at anytime during this procedure,
Accept the O
2
alarm setpoints and step to the next sensor:
 Press RANGE (i.e. Centre RANGE button)
Accept changes and exit the alarm configuration
 Press OK .
3.6 TOXIC GAS ALARMS
3.6.1 Carbon Monoxide (CO)
The Carbon Monoxide (CO) sensor alarm setpoints are
displayed as shown in Fig. 3.10:
Fig. 3.10 Carbon Monoxide Alarms
The highlighted alarm setpoint may be altered by use of
the UP
or DOWN buttons.

GMI GT series Specifications

General

Brand	GMI
Model	GT series
Category	Measuring Instruments
Language	English