Gocycle
®
Owner’s Manual for G2, August 2015
© Karbon Kinetics Limited. All Rights Reserved. 69
9. Ensure all cam levers are
securely closed.
11. Repeat the process for the
other wheel on the other hub.
NB: If you do swap wheels
between hubs while riding
ensure to check the cam lever
free play again as there can be
slight differences between
front and rear hubs.
7.8.2 Checking for and Minimising Wear on the Front and Rear Hubs
Periodically remove the rear
wheel to check for hub wear
To Next Page
Loading...
