340-00313-01
PV Master APP SEMS Portal APP LinkedIn Company's
offical website
JIANGSU GOODWE POWER SUPPLY TECHNOLOGY CO.,LTD
No. 90 Zijin Rd., New District, Suzhou, 215011, China
www.goodwe.com
service@goodwe.com
EM SERIES USER MANUAL
HYBRID INVERTER
2.1 Incorrect Installation
INSTALLATION INSTRUCTIONS
02
2.2 Packing List
A single PV string cannot be connected to multiple
inverters.
Please avoid the following installation errors, which will damage the system or the inverter.
Upon receiving the hybrid inverter, please check to ensure none of the components shown below
are missing or damaged.
The back-up side cannot be
connected to an air conditioner.
The back-up side cannot be
connected to incompatible batteries.
The on-grid or back-up side cannot
be connected to an AC generator.
One battery bank cannot be connected to multiple
inverters.
One meter cannot be connected to multiple inverters, and
multiple current transformers (CTs) cannot be connect to
the same cable.
PE
Terminal
Expansion
Bolts
Battery
Terminal
Fixed
Screw
Positive PV Plug
or
Battery Cover
or
Negative PV Plug
Inverter
User ManualAC Plug
Quick Installation
Instructions
Smart Meter With CT
Wall-Mounted
Bracket
Reset
SMART METER
USB
Hexagon
screw
The back-up side
cannot be connected
to the grid.
Back-Up On-Grid
Wi-Fi
Reset/Reload
SYSTEM
GRID
BACK-UP
2019
ENERGY
COM
Wi-Fi
BATTERY
FAULT
Wi-Fi
Reset/Reload
SYSTEM
GRID
BACK-UP
2019
ENERGY
COM
Wi-Fi
BATTERY
FAULT
Back-Up Back-Up
Load
Wi-Fi
Reset/Reload
SYSTEM
GRID
BACK-UP
2019
ENERGY
COM
Wi-Fi
BATTERY
FAULT
Wi-Fi
Reset/Reload
SYSTEM
GRID
BACK-UP
2019
ENERGY
COM
Wi-Fi
BATTERY
FAULT
PV PV
PV String
Wi-Fi
Reset/Reload
SYSTEM
GRID
BACK-UP
2019
ENERGY
COM
Wi-Fi
BATTERY
FAULT
Wi-Fi
Reset/Reload
SYSTEM
GRID
BACK-UP
2019
ENERGY
COM
Wi-Fi
BATTERY
FAULT
Battery
Battery Battery
Wi-Fi
Reset/Reload
SYSTEM
GRID
BACK-UP
2019
ENERGY
COM
Wi-Fi
BATTERY
FAULT
Wi-Fi
Reset/Reload
SYSTEM
GRID
BACK-UP
2019
ENERGY
COM
Wi-Fi
BATTERY
FAULT
Incompatible
Battery
Battery
Wi-Fi
Reset/Reload
SYSTEM
GRID
BACK-UP
2019
ENERGY
COM
Wi-Fi
BATTERY
FAULT
The back-up side cannot be
connected in parallel
On-GridBack-Up
Generator
Wi-Fi
Reset/Reload
SYSTEM
GRID
BACK-UP
2019
ENERGY
COM
Wi-Fi
BATTERY
FAULT
Smart Meter
Wi-Fi
Reset/Reload
SYSTEM
GRID
BACK-UP
2019
ENERGY
COM
Wi-Fi
BATTERY
FAULT
Wi-Fi
Reset/Reload
SYSTEM
GRID
BACK-UP
2019
ENERGY
COM
Wi-Fi
BATTERY
FAULT
On-GridBack-Up
Air conditioner
Wi-Fi
Reset/Reload
SYSTEM
GRID
BACK-UP
2019
ENERGY
COM
Wi-Fi
BATTERY
FAULT
For protection and convenient maintenance of the inverter, the mounting location should be
selected carefully based on the following rules:
No part of the system should block the switch or breaker that disconnects the inverter from DC and
AC power.
Rule 1. The inverter should be installed on a solid surface, suitable for the inverter's dimensions
and weight.
Rule 2. The inverter should be installed vertically or at an angle not exceeding 15°.
2.3 Mounting
2.3.1 Selecting a Mounting Location
300mm
500mm
200mm 200mm
Upward
Downward
Front
Both sides
---------- 300mm
------ 500mm
------------- 300mm
------- 200mm
Keep away from sunlight
Keep dry Keep clear of snow Sun Rain Accumulated snow
300mm
Rule 3. Ambient temperature must be lower than 45°C.
(High ambient temperature will cause the inverter's power to be derated.)
Rule 4. The inverter's installation site should be under cover, and protected from direct sunlight
and poor weather conditions such as snow, rain, lightning etc.
Rule 5. The inverter should be installed at eye level for convenient maintenance.
Rule 6. The product label on the inverter should be clearly visible after installation.
Rule 7. Leave enough space around the inverter, as shown in the figure below.
The inverter must not be installed near flammable or explosive substances or strong
electromagnetic equipment.
Max
15°
Wi-Fi
Reset/Reload
SYSTEM
GRID
BACK-UP
2019
ENERGY
COM
Wi-Fi
BATTERY
FAULT
Wi-Fi
Reset/Reload
SYSTEM
GRID
BACK-UP
2019
ENERGY
COM
Wi-Fi
BATTERY
FAULT
06
05
To Next Page
Loading...
Need help?
General
