Version: V1.1 136
IPMI Management interface menu description
（1） Instrument panel
On this page, users can view the basic information of IPMI management system. Including firmware
information, network information and sensor monitoring information.
Firmware information includes BMC firmware version information, BIOS version information,
motherboard CPLD version information, backplane CPLD version information and BMC firmware
compilation time information.
Network information includes MAC address of system network and BMC network information. You
can choose to view the shared network port or private network port of BMC. BMC network information
includes BMC network MAC address information, IPV4 network mode information, IPV4 address
information, IPV6 network mode information and IPV6 address information.
Sensor monitoring information will display the current alarm sensor information in real time,
including sensor name, sensor read value, real-time curve change of sensor read value and alarm status.
（2）Sensors
This page displays the status of all sensors. When there is a sensor alarm, the sensor will be displayed
in the key sensor field. When the alarm is released, the sensor will be automatically removed from the key
sensor field.
（3）System list
This page can view the server CPU and memory information. In the block diagram, click the CPU
block to view the CPU information. If the memory block is green, it means that the memory exists. Click
the memory block to view the memory information.
（4）Hard disk information
For the backplane with Expander, the green box indicates that the hard disk is in place, otherwise it is
not. The status of the hard disk can be viewed on the right or under the hard disk box. Left click the green
box to view the details of the hard disk, right click to locate the hard disk.
（5）Power consumption
In this menu, the power consumption can be capped and the latest power consumption can be viewed.
（6）FRU information
Select this menu to view the basic information of FRU.
（7）Log & Report
In this menu, you can view IPMI time log, audit log and video log.
（8）Settings
BMC can be configured in this menu. Including BSOD, date & time, network, etc.
（9）Remote control
On this page, you can start KVM and sol, as well as power control and UID control.
（10）Image redirection
On this page, you can get the latest image file on the remote storage device.
（11）Maintenance
Basic maintenance operations can be performed on the server, such as BMC firmware update and
BIOS firmware update.
（12）Log off
Click to log off the current user's login.
To Next Page
Loading...
Need help?
General
