Version: V1.1 63
3.2.35 Change SMBIOS Event Log Settings
Figure 3- 37
Smbios Event Log
Smbios event logging switch, menu options:
●Enabled
●Disabled
Default value: Enabled
Erase SEL
Clear the system event log control switch, menu options:
●No
●Yes, On next reset
●Yes, On every reset
Default value: No
When SEL is Full
When the storage space of system event log is full, operate the control switch and the following menu
options:
●Do Nothing
●Erase Immediately
Default value: Do Nothing
Log System Boot Event
Set to start recording system startup events, menu options: