Gooxi G2SERO-B User Manual

Version: V1.1 56
Configure IPV4 support
BMC sharelink Management Channel
Configuration Address source
Configurate BMC IP Address source, and the menu options are:
●Unspecified: do not change BMC parameter
●Static: BIOS static IP configuration
●DynamicBmcDhcp: BMC runs Dynamic Host Configuration Protocol dynamically to allocate IP
●DynamicBmcNonDhcp: BMC runs Non-DHCP dynamically to allocate IP
Default value: Unspecified
Change the parameters from Unspecified to other parameters. After saving the restart execution, the
option will restore the unspecified value. There is no need to configure BMC IP every time the startup
process.
When Configuration Address Source option is Unspecified, the network parameter information (IPV4),
current IP configuration mode, BMC IP, subnet mask, MAC address, routing IP and routing MAC of the
shared network interface of the system will be displayed;
BMC Dedicated Management Channel
Configuration Address source
Configurate BMC IP Address source, and the menu options are:
●Unspecified: do not change BMC parameter
●Static: BIOS static IP configuration
●DynamicBmcDhcp: BMC runs Dynamic Host Configuration Protocol dynamically to allocate IP
●DynamicBmcNonDhcp: BMC runs Non-DHCP dynamically to allocate IP
Default value: Unspecified
Change the parameters from Unspecified to other parameters. After saving the restart execution, the
option will restore the unspecified value. There is no need to configure BMC IP every time the startup
process.
When Configuration Address Source option is Unspecified, the network parameter information (IPV4),
current IP configuration mode, BMC IP, subnet mask, MAC address, routing IP and routing MAC of the
shared network interface of the system will be displayed;
Configure IPV6 support
BMC Sharelink Management Channel
IPV6 Support
Select to support IPV6 or not. The menu options are:
●Enabeld: support IPV6
●Disabled: do not support IPV6
Default value: Enabeld
Change the parameters from Unspecified to other parameters. After saving the restart execution, the
option will restore the unspecified value. There is no need to configure BMC IP every time the startup
process.
When the Configuration Address Source option is Unspecified, the network parameter information (IPV6)
of the shared network interface of the system will be displayed;

Gooxi G2SERO-B Specifications

General

Brand	Gooxi
Model	G2SERO-B
Category	Motherboard
Language	English