GoPro MAX - Changing Voice Control Language

68 69
CHANGING PREFERENCES
Preferences let you set up your GoPro any way you want.
CONNECTIONS
Set all of your GoPro’s wireless connections.
Wireless Connections
Turn your camera’s wireless connections on and o.
Connect Device
Connect to the GoPro app. To learn more, see Connecting to the GoPro
App (page 59).
Camera Info
See your camera’s name and password.
Wi-Fi Band
Choose 5GHz or 2.4GHz as your connection speed. Set 5GHz only
if your phone and region support it. To learn more, see Setting the
Connection Speed (page 60).
Reset Connections
Use to reset all of your wireless connections to their default settings.
Customising Your GoPro Customising Your GoPro
GENERAL
Here’s everything you’ll nd under General settings:
Beep Volume
Choose High (default), Med, Low or O. The volume you set here can be
toggled on or o using the Dashboard.
QuikCapture
QuikCapture is on by default. You can turn it o here. It can also be
toggled on or o using the Dashboard.
QuikCapture Default
Choose the video mode you’d like to use when you start QuikCapture.
Default Mode
Set the mode your GoPro captures in when you turn it on using the Mode
button
. This setting does not aect QuikCapture.
Auto Power O
Choose 5 Min, 15 Min (default), 30 Min or Never.
LEDs
Set which status lights blink. Choose All On (default), All O or Front O.
Anti-Flicker
Choose the regional frame rate for recording and playback on a TV. Set
60Hz (NTSC) for North America. Try 50Hz (PAL) if you’re outside North
America. The right format for your region will help prevent icker on a
TV/HDTV when you play back video that was recorded indoors.