Gorilla Playsets Chateau - Swing Leg Cross-Member

2 X 4 X 58"
3/8" WASHER
CROSS-MEMBER
3/8 X 3-1/2"
LAG SCREW
STEP 27: SWING LEG CROSS-MEMBER
1: POSITION THE 2 X 4 X 58" SWING LEG CROSS-MEMBER AGAINST THE SWING BEAM LEGS.
2: LEVEL CROSS-MEMBER AND MARK THE LOCATION OF THE SECURING HOLES INSIDE THE CROSS-MEMBER HOLES.
3: USE 3/8 X 3-1/2" LAG SCREWS WITH 3/8" WASHERS TO SECURE THE CROSS-MEMBER TO THE SWING BEAM LEGS.