Gorilla Playsets Chateau - Roof Peak Support

STEP 28: ROOF PEAK SUPPORT
1: PRE-DRILL HOLES IN THE TWO 5/4 X 10" ROOF PEAK SUPPORTS TO THE PATTERN SHOWN BELOW.
2: PLACE THE 5/4 X 10" ROOF PEAK SUPPORT AGAINST THE ANGLED ROOF SUPPORTS AND FLUSH TO THE SIDES OF
THE ANGLED ROOF SUPPORTS. FASTEN THE ROOF PEAK SUPPORT TO THE ANGLED ROOF SUPPORTS WITH 1-1/2"
WOOD SCREWS. REPEAT ON OTHER SIDE.
5/4 X 10"
ROOF PEAK
SUPPORT
1-1/2" WOOD
SCREW